FBM DRILL vs SOLID DRILL

[mario]

SOLID DRILL is better of FBM DRILL

I lost many good option:

 

- many dept 1 operation vs many dept many operation

 

- we lost REF.POINT

 

I do not understand why

 

excuse my english

 

mh

[Guest]

Reference point can still be used.

 

Create your drill paths,

 

You can then, using edit common parameters, pick and set your reference points.

 

When you regenerate your paths, make sure you have unelected the FBM Drill OP and only select the drilling ops.

 

If for some reason you have to regenerate the entire FBM drilling OP, you will have to reset your reference point again as it will set the parameters of the drilling operations back to the defautl settings.

[mario]

thank's

and for the different depth

[Guest]

You can go into the seperate ops that are created for any additional control that you may desire.

 

Again, you can regenerate the single ops you change but if you regenerate the entire FBD op, you'll fall back to default calculations

[mario]

My guys return with mcamx2 for solid drill