Post question

[BKSCBR600RR]

I'm trying to get my post to output a G187 F200. E.0005

For high cut control on a okuma vmc

And add a G186 to cancel high cut control

I'm not sure if id use a canned text or a misc. integr.

I'm not sure if it can take the first Fvalue in program or what needs to be done

I'm not sure if i can change the .0005 value anywhere also.

I always manuely edit the program.

Im useing a slightly modified mpokuma post

I understand Just enough to get by about editing post

I'm useing mastercam x3

 

 

example

 

G15H1

T1M6

G56H1

M3S15000

G187F200.E.0005

G0X0Y0

Z0

G1X1.F200.

G0

G186

M2

 

Thanks

Brian

[beej]

Welcome to the forum, Brian.

 

 

email me a copy of your post and I can fix it for you and show you what I did.