G10 lines on a Haas

[spade117]

Is there a different code, or a way to input info into the tool offset page on a haas, other than going to that page and manually inputting?

 

For example, on other controls, if I have a G10 line in the heading related to the cutter comp, and I wanted to change due to wear, etc, I can just change the R # in the heading of program, to read from there instead of going to the offset page, and making the change there.

[PeterM]

G10 works on a Haas, just look in the manual under G and M codes for the syntax