Harrison Alpha 550 transfer settings

[CLD]

Can anyone help me with the DNC transfer config. settings for a Harrison Alpha 550 lathe so that I can use the Cimco editor?

Thanks,

Brian Wentzel

Astro Machine Works

[x18pjr]

hello we have the alpha xt too

 

you need to turn the buffers down on the pc on the COM port you are using, if the buffers are to high it will not send the G-code at all,

so slide the bars right down to its lowest point

 

then you need to go in to cimco, and find out want COMport you are using after that

 

you go to transfer and then you select the COMport (we named ares Alpha) and you have to get the alpha listing it flashes on the bottom right screen LSK then you can send it

 

ill get more of a step by step way of doing because iam at home not at work

[CLD]

Thank You very much. I will give it a try.

cld