mpmaster post

[rockstar]

how can i get mastercam x3 to post out n instead of o for sub program # using mpmaster

[Guest CNC Apps Guy 1]

Find the section in the post you see below;

 

code:

---

# --------------------------------------------------------------------------

#Move comment (pound) to output colon with program numbers

fmt O 7 progno$ #Program number

#fmt ":" 7 progno$ #Program number

fmt O 7 main_prg_no$ #Program number

#fmt ":" 7 main_prg_no$ #Program number

fmt O 7 sub_prg_no$ #Program number <<<<< THIS

#fmt ":" 7 sub_prg_no$ #Program number

fmt P 7 sub_prg_call #Program number <<<<< OR THIS

fmt X 2 sub_trnsx$ #Rotation point

fmt Y 2 sub_trnsy$ #Rotation point

fmt Z 2 sub_trnsz$ #Rotation point

---

HTH

[rockstar]

thanks for the help but it still post out with an

"O"

[rockstar]

thanks for the help but it still post out with an

"O"

[rockstar]

test