Okuma canned Cycle Cancel

[kennebec]

The G80 is out put at end of tool, I need it at end of Cycle here is below is my post at end of cycle

 

ptoolend$ #Read from buffer 1 for prv_, current and next tool info

#end tool here, current and next valid

if n1_gcode <> 1000, pretract

#Update current variables to prv_ needed in comparisons

!posttype$

if rc1 < size1, preadcur_nxt

 

 

Any input is appreciated

 

Kennebec

[chris m]

G00 cancels canned cycles; you don't need G80 at all. If, for some reason, you really want it, look at pcanceldc and p80_out in MPOKUMA [if you're using that post] and make sure something isn't commented out.

[kennebec]

Thanks Chris i will check that out...

 

 

Kennebec