Setup sheet Bombs out

[Slixmix]

Using v9 sp1 level 3 w/solids. Settings are for .set setup sheet and is html in my config file. Everytime I go to write the html (it actually says .doc file) my computer crashes with the famous last words:

 

Mill9.exe has generated errors and will be closed by windows. You will need to restart the program.

 

Any help? Thanks

[Roger Martin from CNC Software]

quote:

---

Settings are for .set setup sheet and is html in my config file.

---

???

Which option is set on your config on the NC settings page?

 

1> Post (uses .SET file)

2> Using Graphical Interface

 

The '1' setting produces a text file (with a .DOC filename).

The '2' setting produces an HTML file.

 

Are you running Mill, Lathe, or???

[Slixmix]

It is set to .set in my configuration. It works fine when I set it to graphical interface.

[Slixmix]

Running Mill 9

[Roger Martin from CNC Software]

Very strange...

 

Does this occur with ANY MC9 file?

What OS is on your computer?

 

If you wish, you can e-mail me the MC9 file that causes this problem when trying to generate the .DOC setup sheet file. I also MUST have the .SET file that is being used.

 

You can determine the .SET filename by ->

Screen, Config, Files, highlite 'Setup Sheet Template' in the File Usage area, then read the

File Name below.

[Slixmix]

I pulled up another chamber I programmed and it runs fine. Something in my source is causing it to crash.

[Slixmix]

Windows 2000 service pack 2

 

Dell Lattitude C810 laptop

1.4 ghz p3

1/2 gig ram

32 mb Nvidia Geforce 2 Go

 

Because of non-disclosure agreements I cannot send the damn file! Sorry about that. We do work out here in Silicon Valley for Semiconductor chip makers.