Post update X4 errors

[PeterDnz]

Just updated my X3 3axis Router post to X4 but have problems with the output. Specifically no feed speeds and G50 on the first and last rapid positioning line.

Those are just what I can see at first glance.

If someone can provide some pointers for me I'd have a go at fixing it. But any assistance with this will be gratefully accepted.

[PeterDnz]

Here's what I think are relevant lines from the report from update post:

37 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - This 'parameter read' postblock was found in the post: pparameter$, This 'parameter read' postblock was found in the post: pwrttparam$, Parameters are changed in Mastercam X. Reference the post update guide or contact your reseller.

38 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17038. Please check the parameter number.

39 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17039. Please check the parameter number.

40 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17046. Please check the parameter number.

41 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17047. Please check the parameter number.

42 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17040. Please check the parameter number.

43 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17041. Please check the parameter number.

44 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17048. Please check the parameter number.

45 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17049. Please check the parameter number.

46 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17045. Please check the parameter number.

47 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17043. Please check the parameter number.

48 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17042. Please check the parameter number.

49 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17051. Please check the parameter number.

50 - 28 Jul 2009 06:47:48 AM - PARAMETER DATA - - Possibly incorrect parameter number detected: 17050. Please check the parameter number.

51 - 28 Jul 2009 06:47:48 AM - ***** End of update processing *****

[PeterDnz]

Don't bother, it's fixed.