post needed for Hurco ultimax 3 control

[Chris Parish]

hello to All:

 

Does anyone have a post processor from Mastercam to a Hurco Ultimax 3 control

 

Thanks....

[Tony]

Do you have the ISNC option?

[Finecut]

Like Tony said, there are 3 levels of nc for the hurco. What level do you have ? 1st level is a pain. Not much to work with. Its included in the control.

2nd level at least puts a dent in the nc side

3rd level with a few options is as close to a fanuc as youll get. Not bad for a hurco . Its still needs work.

 

finecut

[Chris Parish]

This Hurco (commonly referred to as the irkel)

It has the ISNC format. Unfortunately the machine was transferred from Chicago to Here in Rochester. All programs in the control are in the Hurco format (1234.HD3). I need to know if someone has a sample of a square that will run. I have tried a ultimax 2 code and as well as an ultimax 4, but it wont recognize the program. This is the upgrade control with dxf option and the dual screen. Please help