post help

[screamindemon]

I don't know if anyone can help me but here goes, I did a search and got nothing but what I need is this, I have the post editing cd but it is not helping I am trying to edit my post for a mitts machine so that it will recognize my e-pack values and insert the proper condition code example: E1201 will give me A M103

E1202 will give me a M101

 

any help is greatly appreciated

 

warren

[Charles Davis]

That's not a post issue, per se.

 

The epacks are put in using the wire library.

 

After you chain and the toolpath parameters are show, Click on Wire Library, browse to Mitsu?? and pick the wire diameter. A list of files is shown. Check the wire manual for the format, but these are named based on material, material thickness, and the number of passes.

 

This should fill in the epacks properly. Now, if the epacks aren't right, then you either need to change your post, or create your own libraries; which is a whole different subject.

[screamindemon]

the epacks are right but i need my post to recognize the epacks and enter an m code right after, the m codes are for power master

 

thanks for the reply