Okuma Multus B300 programing training

[Todd Frerking]

Our shop is looking at buying a Okuma, Multus B300. In regards to programing, our Mastercam dealer here seems to be limited on multi-axis training. What I am needing is any info on proven Mastercam instructors that would be able to give us the proper training for programing this machine. Any help would be greatly appreciated.

Thanks

[Guest Tyler Yanta]

Hello Todd,

 

if you care to provide a more detailed location, I may be able to put you in contact with an instructor in your area. If you would rather not post that info on these forums, feel free to email me: tyler.yanta [at] inhousesolutions.com

[Mugsy DeDawg]

Todd,

Is yours an Okuma Multus B300W or a tailstock equiped machine? I am in Seattle, but our local dealer is pretty well versed in these machines. We have a Multus B400W on our floor right now, and will be programming it with MasterCAM and the Okuma ADMAC softare depending on the specific part needs.