SOLIDS FEATURE ARRAY

[FUSION]

Is it possible to transform or array solids features? I have a round part with about 10 radial slots in it with an edge radius around both sides of the slots. Can I create one instance with rads and then array it with 9 copies, or do I have to cut the slots then pick all 80 edges to put the rads on.

[P_Scott]

Fusion,

 

If they are all on the same solid Face, you can select the Face, instead of Edges, to apply the Fillet to the edges at the top of your slots. It is faster to perform a Fillet this way but it sometimes won't work because it will attempt to Fillet ALL the edges on that single Face. HTH

[cadcam]

Have you tried picking one edge on each slot and propagating along tangencies?

 

JM2C

[FUSION]

Propagate along tangencies works great, it greatly reduces the edge picking. But the question is can you "array" "copy""transform" assosiative features from the solids manager tree.

[Guest CNC Apps Guy 1]

Fusion,

 

I don't believe so. There are no translation/rotation/mirror capabilities in the Solids Manager.