Projecting toolpath

[Dave]

In version 7.2 I have no trouble creating a 2d toolpath and projecting that toolpath onto a surface while adding depth cuts. In version 8.0 While projecting lettering onto a surface the cutter often will stay down between letters therefore creating an unacceptable toolpath. Also the NCI selection only makes available those toolpaths currently in the operations manager. Version 7.2 allowed you to look in the NCI directory to find the toolpath desired. Has anyone else experienced these problems? Should I be doing something different?

Dave

 

[Allan Brown]

As far as the NCI problem goes, use the Import NCI toolpath to import an external NCI file into your current Operations Manager.

Modify your Gap settings go control the retract/stay down tendencies.