creating NC operations with VBScript

[Scuba Jon]

I have a bunch of points on a few levels in MC and would like to make a VB script to convert those points to toolpath. Specifically, I would like to put them into Circmill toolpath and then add the parameters. I have no problem making a script to isolate & group them I just do not know the syntax needed to create an operation in the toolpath group. I have searched years worth of posts here and been through the ftp/vbscript site and can find no examples of how this is done. Thanks for any help you can offer.

[Mick from CNC Software Inc.]

Randy,

 

Zip up and send me what you have and I'll take a look.

[Roger Peterson]

It's easiest to import an operation from an operation library via a vbscript that would have all the parameters preset.

 

 

HTH