Create rectangle and toolpath in VBScript

[JSNYDER6969]

I seem to have lost my thinking cap. Could somebody tell me how to create a rectangle/line in VBScript and then apply a contour toolpath around it using: depth cuts and/or multipasses, cutter compensation, named tool from library,... I would then move on to drawing more lines, applying more toolpaths and so on. I only want to select/chain/toolpath one geometry at a time. Thanks in advance and HAPPY MONDAY!

[Mick from CNC Software Inc.]

Check the "Toolpath Door CHook.vbs" script in your VB folder, there are also a few other examples in there.

[JSNYDER6969]

Thanks Mick, I've actually been using your "Make Cabinet Part" to work out the drawing of the entities but where I'm stuck is the "ChainAll" in "Toolpath Door". I would rather eg.. create the line, apply a toolpath to it, clear all selections, create another line...... it would work out better for me than to draw all the lines on seperate levels and select them that way. Am I making any sense or am I too far gone. I also remember seeing a script that called out a tool by name but can't locate any more. Thanks again.