post help !

[vulan]

I just installed mc v 9.1 , then i can't use my old post? ,after i post the program , the sequence number does not work ( just have N0 , N0, N0 ...), and there is no header at begining of the program , no space between x,y ,z move...this post works perfect with mc 9. sp1 . ,also the out put for Z Min and Max seems disable?

Any input will be appreciated!

Thanks

[Rekd™]

Did you update the posts using the update c-hook?

 

'Rekd teh Always check the obvious first..

[Zero]

Yes, as Rekd said, even if you updated your post from v8 to v9, you should update again from 9 to 9.1.

[vulan]

Thank you for your quick reply, i gave it a trial , but it still does not work , still have no header , sequence numbers still no change, like :

N0X..Y..

N0..

N0..

N0..

still have no spaces between , even in my post:

Spaces 1

Please help me out , any one!

Thanks

[Allan Brown]

Sounds like you are posting via the menu, rather than by the Operations Manager? Visit the Patches section to read up.

[vulan]

Hi Dave!

Thank you very much , it works fine with the way you said.

I didn't think it makes the difference!

Have a nice day!