IPR / IPM Cleared

[kjbrack]

I am wanting to post G99 or G98 after every tool change. That way if we jump around in the program the correct feed will work. I am using the generic Haas lathe post, Mastercam X4mu3. Is there a code I could put at the end of the tool change part of the post to clear the saved ipr/imp so that it will re-post the correct feed.

[kjbrack]

Here is what I got to work.

 

At the end of the toolchange I added

 

 

ipr_actv$ = c1_ipr_actv

*sgfeed, e$

 

 

Works Great.