MasteCAM X4 MU3 Drive/Check Surface Problem

[sparnai]

Hello

 

Have a problem with Show function when want to see Drive or Check surfaces during surface tool path.

When I mark Drive and Check surfaces and want to see them separately pressing Show button it shows me Check and Drive surfaces together, how I can fixed it?

 

 

Thanks in advance

[Guest]

Use surfaces in stead of solid faces, only way to get it the way you want in X4

[Mr. Wizzard]

also, if you're just trying to surface that angle with surface>finish>flowline, you shouldn't need to select a check surface since the one you want to drive isn't going to collide with the one you don't want to hit.

Or create surface from solid and extend the edges so the tool over machines a little.

[sparnai]

It simply was as example Mr. Wizzard.

 

"Use surfaces in stead of solid faces, only way to get it the way you want in X4"

 

JParis in X5 it will work in another way?

[sparnai]

What does this error mean?