4Axis Post Help Please

[gabedrummin]

I have a home made machine that uses the Maxnc controller. I use mastercam v-8 with the MpMaxnc post and it works well .execpt for 4 axis. It wont post anything . I dont have a clue how to change the post.Pleas help.I attached a text file of the post. I use x-4 at work and my reseller said he wont support v-8 post .It would be great if someone could help thanks...

MPMAXNC.txt

[Simtech]

You already have the paout and pbout post blocks defined, just add these into your mouvement post block, ie, startabs, etc ...

pstartabs

n, *sgcode, pabs, pwcs, *xabs, *yabs, paout, prange, pcan, e

[gabedrummin]

You already have the paout and pbout post blocks defined, just add these into your mouvement post block, ie, startabs, etc ...

pstartabs

n, *sgcode, pabs, pwcs, *xabs, *yabs, paout, prange, pcan, e

Thank you for the repley but I have no Idea what is needed to be done .I was hoping someone could take the text file I posted and show me the changes , then I could modify the post thanks again......Okay I Added the paout to the Pstartabs line . but still no a -axis movement in the program....What am I missing ? thanks.

[Simtech]

Try adding the asterix as in the following:

 

paout # Calculate Output variables

*aabs

!xs, !aabs

[gabedrummin]

Try adding the asterix as in the following:

 

paout # Calculate Output variables

*aabs

!xs, !aabs

I did and it gave an error can not force with ! *