5 Axis Post issues

[dan73]

Hello everyone.

I am in need of some help. I am using a heavily modified Generic Fanuc 5 Axis Post used for just positioning (not full 5-axis milling). It does everything it should, except that when the primary axis is a positive value, it repositions itself 180'. Works fine, except the operator

cannot see the workpiece. How do I change this?

Second issue- When I post out individual ops using a different WCS, it will post correctly (G55,G56,etc.), but when posting multiple ops it post only the very first WCS called (g54) for all ops.

Any suggestions?

[Guest]

I'd get with your reseller on that one