Changing Rapid moves to Linear

[Aeroguy]

Hi All.

I am trying to get a post for a Haas VR11 5 Axis to post out all rapid moves as a feedrate. Not sure how to do that actually as I don't have much Mastercam post experience.

Any ideas ?

[Chris McIntosh]

Depends on the version of the post you have. Typically this is done through the control definition. In mastercam, go into the settings menu, select control definition, then on the left side of the window select the feed menu. There is a check box here for "Convert rapid to maximum feedrate". Check the box and, if the post supports it, you will have all your G0's converted to G1's with high feed rates.

[Aeroguy]

Yep, that worked aces. Thnaks