Need a good tool library

[BTA]

Our tool library doesnt have any diameter info so it will go off of the letter/number system and that doesnt work well enough for us. Is their a library update we can use to blanket all our tools on X5?

[Guest CNC Apps Guy 1]

Our tool library doesnt have any diameter info so it will go off of the letter/number system and that doesnt work well enough for us. Is their a library update we can use to blanket all our tools on X5?

 

 

BTA, welcome to the forum. You're probably going ot need to provide a little more detail about what exactly you're after. The standard tool libraries have diameter info in them. You want to change from diameter to letters and numbers? Blanket your tools??? Are you talking a mass edit situation?

 

Please clarify so we can point you in the right direction.

[BTA]

We dont show a diameter in the library. When you turn filter off and look in the library their is nothing in the diameter collumn or any collumn but name.

[dylskee]

I know this might seem too simple but You never know......

Hover your mouse at the top of the toolbar where the columns are and drag the columns to the right, they might just be collapsed to the left. I'm guilty of it sometimes myself.