9006 SN : 1 Spindle Error (AL-006)

[within a thou]

On one of my HMC's everytime the Y axis travels in the positive direction at one point the machine alarms out and gives me this message. The book tells me this is a faulty feedback cable. I just dont understand why it is only in one spot and only happens in the Y+ and not in Y-. Has anyone seen this or know what I need to do to fix this?

[Newbeeee™]

Just a thought - its probably an old(ish) cable with either a dry joint/connection which is playing up as it moves.

I very much doubt it's broken, so I'd power down and check the joints/connections.

[within a thou]

Thanks newbee that was what it was a cable kept getting pinched. The tech just left and we are back up and running.

[maan_sunny]

Hello sir

 

Sir i am also facing a same problem...you are pointing towards the damaged cable...can you please send me the picture of exact location of that cable along with the picture of cable...? Kindly help me...i'll be very greatful to you... Send me the pictures at this email address ([email protected])... Thank you...