trunnion

[pelon]

I am using generic haas VF-TR_series5X Mill .pst and when I only rotate -B- axis and move from one wcs to another the position callout is before the wcs callout.

See example below. How can I change this?

 

 

G2 X-1.1501 Y-2.1123 I-.9475

G1 X-1.2696 Y-2.2789

G2 X-1.9145 Y-2.6429 I-.7146 J.5126

G3 X-2.5391 Y-3.1963 I.0552 J-.6915

G1 Z.517 F30.

G0 Z6.

( ROUGH )

M13

B180.

M12

X4.5921 Y-6.0785

G154 P4 X4.5921 Y-6.0785 B180. A90.

Z6.

Z1.1725

G1 Z.5896

G41 D1 X4.6143 Y-5.1413 F50.

X4.3643 Y-5.1354

X4.0991 Y-5.1291

X3.9403 Y-5.1257

[Ivan Mikesic]

It seems like the post block you need access to is psof_tlchg_blck. That post block is in the encrypted portion of the post which means it cannot be edited.

 

I would recommend contacting your local Mastercam reseller.

[pelon]

OK Thanks