Mastercam NCI & APT-CL

[Guest SAIPEM]

If you need to share your Mastercam NCI & CATIA/UG/NX/etc. APT-CL on a bi-directional basis, check this guy out.

http://www.ncdataservices.com

 

He has a FULL Bi-Directional NCI/APT-CL converter that supports Mastercam 2x-5x Milling & Drilling, Turning and Mill/Turn!

That CATIA Source CL file can actually be loaded in CATIA for collision check and video replay before posting!

[dforsythe]

All of our Catia post are from them. great support and easy to modify. i would recomend them.

 

 

[Watcher]

All of our Catia post are from them. great support and easy to modify. i would recomend them.

 

The guy sent me a message at CAMZone offering me to test the product... I politely explained him that it's not in my plans to make that page a commercial place, but he was very open and told me he is not in this business to get rich... but rather, to offer a reasonably priced post-processor solution for contract programmers and small shops...

 

It's very good to hear that you guys are happy with it... I added them to my article about post-processors but I was afraid to comment about it without knowing anything about their solution.

 

Thank you for sharing this, it confirms my impression that this guy is also driven by a passion like many of us. Some products, people and their ideas only need an opportunity to shine.

 

Best,

 

Daniel