mplmaster help

[Larry1958]

Need help with outputting M98 P1 (home position) without have to write them to misc values if possible for our Hardinge Conquest lathes. Checked options for home position output but no option for this function. Does anyone have an easy solution? Thanks in advance.

[kh012]

we have 4 hardinges, they all use old posts.

I just hard coded the M98 P1 into the ltlchg$ section and the M98 P2 into the pl_retract section.

with newer posts you could get pretty creative on how to input them.

 

HTH, Ken

[Larry1958]

Thanks Ken,

 

Trying to work with the newer Mplmater for our machines. Some of our post go back to Ver.6 and really would like to get updated. I can hard code it into the newer post but was looking at all alternatives. Thanks again.

 

 

we have 4 hardinges, they all use old posts.

I just hard coded the M98 P1 into the ltlchg$ section and the M98 P2 into the pl_retract section.

with newer posts you could get pretty creative on how to input them.

 

HTH, Ken

[Larry1958]

Thanks Ken,

 

Trying to work with the newer Mplmater for our machines. Some of our post go back to Ver.6 and really would like to get updated. I can hard code it into the newer post but was looking at all alternatives. Thanks again.

 

 

we have 4 hardinges, they all use old posts.

I just hard coded the M98 P1 into the ltlchg$ section and the M98 P2 into the pl_retract section.

with newer posts you could get pretty creative on how to input them.

 

HTH, Ken

[Guest]

If you checked with your reseller, you'd find he has access to a pretty good already.

[Guest glorie]

Thanks Ken,

 

Trying to work with the newer Mplmater for our machines. Some of our post go back to Ver.6 and really would like to get updated. I can hard code it into the newer post but was looking at all alternatives. Thanks again.

 

 

KH012, on 29 February 2012 - 01:39 PM, said:

 

we have 4 hardinges, they all use old posts.

I just hard coded the M98 P1 into the ltlchg$ section and the M98 P2 into the pl_retract section.

with newer posts you could get pretty creative on how to input them.

 

glorie