Nethasp on Windows Server 2008

[Tyler Robertson]

If you have trouble installing a NetHasp on Windows Server 2008 (64bit), you can download the correct driver here:

http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP4&o=Windows&t=Runtime+%26+Device+Driver

 

Direct link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP4&o=Windows&t=Runtime+%26+Device+Driver#

 

Server will not update it for you, so the nethasp will not install correctly even if you install the license manager that comes with Mastercam. The Hasp won't light up, and your client will get in a huff after an excruciating 10 minutes and tell you to come back.

[Scott Lundin Shopware Inc.]

+1 Just ran into this problem and this resolved it. I was somewhat confused as to which file to download so the one that worked was called:

Sentinel LDK/HASP/Hardlock/HA SP4/HL Runtime Setup - 14.4MB - ver 6.23 - released 2012-03-28

[Scott Lundin Shopware Inc.]

I have asked CNC to add this to a tech talkin article and place it on the mastercam extranet help center.