Select "clean" operations (X3)

[Niezingerly]

I want to be able to select All Non-dirty Operations, in the ops manager, in Mastercam X3

 

Below is a script I found that will select all Dirty Ops.

 

Is there a way to "invert" this, or define some other criteria that would select "clean" ops?

 

I ahve been looking in the reference guide, and am un-able to find anything...

 

 

Thanks very much...

 

 

 

' -- Start Script

Call Main()

 

' ////////////////////

' Sub Declaration

' ////////////////////

Sub Main()

Call RunMastercamCommand("OMselectDirtyOperations")

End Sub

[rocheey1]

Dim blOpIsDirty, blSelected, intOpCount, intOperations, strResult

intOpCount = GetOperationCount(vbNullString)

' -- Iterate thru all the OPs
For intOperations = 0 To intOpCount-1
blOpIsDirty = GetOperationDirtyFromID(vbNullString, intOperations)
If blOpIsDirty Then
	strResult=vbcr & "Op " & intOperations & " needs regenerating"
	blSelected= SetOperationSelectedFromID (vbNullString, intOperations, False)
Else
	blSelected= SetOperationSelectedFromID (vbNullString, intOperations, true)
End If

Next

If strResult > "" Then
strResult="--- Results ---" & vbcr & vbcr & strResult
Else
strResult="No Regenerating necessary"
End If
ShowString strResult

[Niezingerly]

Very nice!!

 

Thanks very much for the help.

 

I will give this one a shot.

 

Looks as if that is the ticket...

 

Thanks again...