Import/Export Tooling Operations

[Ron_Roy]

Hello All

I Exported seven Toolpaths that I had generated on a previous part so that I could use them on an ensuing similar part.(Right Click in Operations Manager then use Export)

What used to happen was the Entire Toolpath was exported without the Geometry, then one could simply apply the toolpath to any other geometry by using the Import function in the Operations Manager. What happened this time was that during the Export 3 of the Tool Numbers, Length & Diameter offsets had been changed - one Tool that had been picked was changed to a High Speed Tool I had in my own personally created Tool Library.

Has anyone else had this happen to them?

I use Import/Export quite often - having to check all of my Imported Tool Paths sort of defeats the benefits of using the Utility.

Thanks

Ron