31i Monitor (for spindle speed)

[Niezingerly]

Good Friday all...

 

I am running a Fanuc 31i, and want to know if there is a parameter I can change to do the following:

 

On our 18i controllers, if I change the Spindle Speed Override, say to 110%, I can click over to SYSTEM MONITOR and the control will give me the true RPM the spindle is running at, taking into account the 110%.

 

If I do the same on the 31i, I can get to the MONITOR page, but the RPM is not changing when I adjust the Spindle speed override.

 

Is there a paramenter that I can set on the 31i to get this to function?

 

Thanks.

[Guest CNC Apps Guy 1]

#3105.2 should be a 1 (The actual spindle is displayed)

#3111.6 shoudl be a 1 (SPindle speed is shown)

[Niezingerly]

Thanks very much.

 

I will give that a go...