Letter"P" instad letter"S" for speed.

[odessa]

Good Morning everybody!

I have some problem with my postprcessor. I have HAAS ST-10Y lathe and this machine required letter"P" instad letter"S"

for live tooling speed. For example I have S2000 RPM but I need P2000. Please help me change something in my post-

processor.

 

Thanks in advance.

[Bjorn Petersson AME AB]

Hi,

 

If your postprocessor is the generic Haas 4x MT that comes with Mastercam:

Locate these lines:

#result = nwadrs(strp, speed) #Different letter than 'S' for mill spindle?

and uncomment them:

result = nwadrs(strp, speed) #Different letter than 'S' for mill spindle?

 

If you're using another post, where it's not already prepared, add the new address. (result = nwadrs(string, variable))

Don't forget to change it back to "S" if you use the same variable for lathe tools as for live tooling.

[dagostin]

change

 

 

#Address string definitions

stra : "A" #String for address A

strd : "D" #String for address D

stre : "E" #String for address E

strf : "F" #String for address F

stri : "I" #String for address I

strk : "K" #String for address K

strm : "M" #String for address M

stro : "O" #String for address O

strp : "P" #String for address P

strq : "Q" #String for address Q

stru : "U" #String for address U

strw : "W" #String for address W

srad : "R" #String for address R (radius)

srminus : "R-" #String for address R- (minus radius)

strs : "S" #String for address S ___________________________________change for P

 

Regards

Andre

posprocessador.blogspot.com