Post error

[Don S at Barefoot CNC South]

I have been trying to get rid of a post error code is good but always an error.This is a lathe post.

 

 

PARAMETER DATA - The requested parameter data object was not created: Operation parameters

 

Any help would be appreciated

Thanks Don

[EX-wccprogrammer]

Put up the log file generated when you get this error, it will help isolate the problem.

[Don S at Barefoot CNC South]

Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4764 StartFragment: 314 EndFragment: 4732 StartSelection: 314 EndSelection: 314

30 Sep 2013 08:41:33 AM - <0> - Report created.

30 Sep 2013 08:41:33 AM - <2> - Initialize posting log file

30 Sep 2013 08:41:33 AM - <2> - Using MP run version 16.00 and post components version 16.00

30 Sep 2013 08:41:33 AM - <2> - Initiate opening the post processor file(s).

30 Sep 2013 08:41:33 AM - <2> - Y:\TFO DEPARTMENTS\CNC\MC X7 POST\PUMA LATHE POST\PUMA 400.PST

30 Sep 2013 08:41:33 AM - <2> - The post processor file has been successfully opened.

30 Sep 2013 08:41:33 AM - <2> - Post version information (input):

30 Sep 2013 08:41:33 AM - <2> - UPDATEPOST Version 16. was used to modify this file.

30 Sep 2013 08:41:33 AM - <2> - The file was modified by this product on 29 May 2013 10:21:32

30 Sep 2013 08:41:33 AM - <2> - The post was written to run with Mastercam Version 16.

30 Sep 2013 08:41:33 AM - <2> - The post product type is Mill/Turn.

30 Sep 2013 08:41:34 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.

30 Sep 2013 08:41:34 AM - <2> - Search for defined post variables, strings, postblocks was successful.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'ltol$' was re-initialized from 0.002 to 0.0005

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'atol$' was re-initialized from 0.01 to 0.5

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'maxnccomment$' was re-initialized from 256. to 120.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'dec_seq_left$' was re-initialized from 3. to 4.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'sub_seq_typ$' was re-initialized from 0. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'tplanemode$' was re-initialized from 2. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutput$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputxz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputyz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctype$' was re-initialized from 6. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutput$' was re-initialized from 1. to 0.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctypexz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larctypeyz$' was re-initialized from 6. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutputyz$' was re-initialized from 1. to 0.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcs$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsxz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsyz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsxz$' was re-initialized from 1. to 2.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'arccheck$' was re-initialized from 1. to 111.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'larccheck$' was re-initialized from 1. to 111.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed4$' was re-initialized from 2. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed5$' was re-initialized from 3. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed4$' was re-initialized from 2. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed5$' was re-initialized from 0. to 1.

30 Sep 2013 08:41:34 AM - <2> - CONTROL DEFINITION - Post variable 'peckacel$' was re-initialized from 0. to 1.

30 Sep 2013 08:41:34 AM - <2> - PARAMETER DATA - The requested parameter data object was not created: Operation parameters

30 Sep 2013 08:41:34 AM - <2> - Successful completion of posting process!

[Peter - Avivi CNC Solutions]

I still guessing here, but may be you mistyped a parameter number or a number has changed in X7

[Don S at Barefoot CNC South]

I had the error in X6 as well hope X7 would fix it.

[EX-wccprogrammer]

Do you get the error when you post only one operation? Maybe you can isolate the offending area by selectively posting. You may need to step through this program in Debug to find the culprit. Good Luck.

[Don S at Barefoot CNC South]

Yes I still get error just postig one operation. Thanks

[Don S at Barefoot CNC South]

I found the problem. Thanks

 

#rd_params$ # Rem DKS

#if write_ops = 0, result=mprint(swriteopserror, 2) #Write NC Operation information MUST be enabled in CD Rem DKS