Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

X7 Posting errors

Brewster

By Brewster,
in Industrial Forum

 Share

Recommended Posts

Brewster Newbie

Brewster

Posted
Posted

I recently (today) started receiving errors while posting. I posed several programs last week and everything worked fine. I tried posting this morning and I received errors during posting. I have been on X7 since its release (SP2 now and have been running it since it was released). I have not modified my posts. To my knowledge, there has not been any change to my system or posts of mach defs. I even posted the files from last week that posted fine, and now i receive errors on them. I have verified the posted code and so far there hasn't been an issue with the code, but i would rather get this fixed. any ideas how to fix this?

 

25 Nov 2013 10:11:51 AM - <0> - Report created.

25 Nov 2013 10:11:51 AM - <2> - Initialize posting log file

25 Nov 2013 10:11:51 AM - <2> - Using MP run version 16.00 and post components version 16.00

25 Nov 2013 10:11:51 AM - <2> - Initiate opening the post processor file(s).

25 Nov 2013 10:11:51 AM - <2> - C:\USERS\PUBLIC\DOCUMENTS\SHARED MCAMX7\WIRE\POSTS\MITSUBISHI 90 HA.PST

25 Nov 2013 10:11:51 AM - <2> - The post processor file has been successfully opened.

25 Nov 2013 10:11:51 AM - <2> - Post version information (input):

25 Nov 2013 10:11:51 AM - <2> - UPDATEPOST Version 16. was used to modify this file.

25 Nov 2013 10:11:51 AM - <2> - The file was modified by this product on 11 May 2013 07:22:12

25 Nov 2013 10:11:51 AM - <2> - The post was written to run with Mastercam Version 16.

25 Nov 2013 10:11:51 AM - <2> - The post product type is Wire.

25 Nov 2013 10:11:51 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.

25 Nov 2013 10:11:51 AM - <2> - Search for defined post variables, strings, postblocks was successful.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'max_atol$' was re-initialized from 179. to 179.5

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'trunc_mtol$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'maxnccomment$' was re-initialized from 9999. to 99999.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'maxnccomment$' was re-initialized from 256. to 120.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'dec_seq_left$' was re-initialized from 3. to 4.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'sub_seq_typ$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'tplanemode$' was re-initialized from 2. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'nobrk$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'nobrkxz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'nobrkyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lnobrk$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lnobrkxz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lnobrkyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutput$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputxz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'arcoutputyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutput$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'larctypexz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'larcoutputyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcs$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsxz$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'breakarcsyz$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcs$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsxz$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lbreakarcsyz$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'helix_arc$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lhelix_arc$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arc$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arcxz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'do_full_arcyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arc$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arcxz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'ldo_full_arcyz$' was re-initialized from 1. to 0.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed4$' was re-initialized from 2. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'rotfeed5$' was re-initialized from 3. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed4$' was re-initialized from 2. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'lrotfeed5$' was re-initialized from 0. to 1.

25 Nov 2013 10:11:51 AM - <2> - CONTROL DEFINITION - Post variable 'sub_level$' was re-initialized from 0. to 0.

25 Nov 2013 10:11:51 AM - <2> - RUN TIME - Only single-axis rotation is allowed! Angles may be incorrect.

25 Nov 2013 10:11:51 AM - <2> - Successful completion of posting process!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...