Continuous Download configuraion for Sabre sx500 milling machine

[Graveyard]

Hello all,

I have a question and hoping someone can help. I'm home now but I run an older (94' model) Cincinnati Sabre sx500 mill.

I use a dnc program to transfer smaller code but from time to time I need to do a continouous download for large programs.

I can do this with a Cincinnati Sabre 1250 all the time but the settings seem to be different for the sx500 model. I have it far

enough along that it will connect and load the first time to memory. On the pc, it will continue to dl'd and scroll the code off the screen.

I will have to look it up but I have a couple ascii codes at the beginning and the end...and these codes work with the 1250 sabre.

These codes tell mastercam (version 9) to wait till the loaded program runs practically all the code before loading the next section.

I don't have my chart in front of me but one ascii code is the % sign and the other is a solid black box. I have those at the beginning and end.

Does anyone know of another ascii character that would tell the software to load, run, dump, load and so on?

Thanks

 

I can post the settings of the mill and pc tomorrow