New Haas VF5 SS probing issue

[Eric@HorsepowerInc.]

We just added another Haas, yeah I know. Anyhow, with our 2010 vf5 we do some part probing to re-square castings on our TR-160-2, we now basically have the same thing with the new one but just a SS model. We are trying to run the exact program that is from the older Haas, but the probe setting are goofy. When trying to reset the rotary position, it inputs the value in the A axis offset, not the B as it does in the older Haas. Why would the exact same routine input the value in the wrong place? A parameter/setting? Going to call our reseller in the a.m., but very frustrated at this point. We have checked all the macro statements, none show a change from these two machines. Any ideas?

[Eric@HorsepowerInc.]

All fixed, thanks to the guys at Renishaw! That being said, for any new Haas buyers be aware some of the probing routines are incorrect! Make me wonder what else is wrong, time will tell. Just an FYI