DRILL TOOLPATH BLOCK

[Penoy_aku]

Hello everyone,

 

i generated this code from MCX5 3axis V-milling. what does R3 and Q2 means?

I tried to draw new simple objects and generate the code and notice R value does not change.

 

( DRILL-5.5 )
T17 M6
G0 G90 G54 X32.5 Y0. S2500 M3
G43 H17 Z10.
M8
G98 G83 Z-22. R3. Q2. F125.
X-32.5
G80
M9
M5
G91 G28 Z0.
M01

 

[Robert Ouellette]

that is your retract plan for a drilling cycle. so your drill will rapid to 10" above your part, then rapid to 3" and start drilling from there until it gets to -22" in your part.

[Penoy_aku]

Thanks alot for the help........ i edited in parameters and there it is the word "peck".