Mazak control Batteries where are they ???

[ERIC14779]

We have 7 Mazak machines:

 

three QTN-350's 2005,2006,2007 all 640T Nexus Controls

 

a QTN-350-II 2007 Matrix Nexus Control

 

a QTN-450-II 2008 Matrix Nexus Control

 

a Integrex 200-IV ST 2008 Matrix Control

 

And lastly,

 

a Integrex i-100 ST 2013 Matrix 2 Control

 

 

I know where and what the Control Battery is on the 640T Nexus Controls:

 

Mazak # D50USA00090

 

I get batteries from OSI Batteries their # is LS14500MER

(OSI has the MRJ-2 drive batteries also)

 

 

 

but on the other Matrix control machines, I can not find where they are...

 

the Mazak # for the Matrix control battery is D50USA00150

 

but I do not know where they go on our machines...

 

Can anybody help ??

[SuperUser]

Funny I had to buy batteries for my lathe. This is were I bought them.

http://www.batteriesdirect.com/product/details/specialty-batteries/mitsubishi/mr-j2

good luck

[ERIC14779]

Thanks for your reply SuperUser....

 

But sourcing is not my problem, Locating the Matrix CNC Control battery is....

 

I know where the Servo Drive batteries go....

[Sparky112]

we have QTN's here, 250's and 350's. my experience is the module that needs the batteries will flash an alarm as well.  

[SuperUser]

Sorry should have read the whole post.

it should be behind the control itself, on the left, 2 screws should open it up. Power off machine, machine gives you 30 min to change the battery, so you should back the control up before you start.