Mazak Integrex E Series stock/verify issue.

[DODGERFAN]

I'm programming a square part on a Inegrex mill/turn. 

The issue I'm having is this,   when I use verify it shows the swing of the part and not the square stock I defined.

I wont be using the lathe function of this machine, just milling.   Is there any way to make verify show square

stock instead of the swung stock?

[DODGERFAN]

Beuller?   Beuller?   Anyone?  Anyone?

[Mike-T]

 Make a stock model and reference in the verify settings..  Works fine.. My problem is mixed turning and milling...

[DODGERFAN]

 Make a stock model and reference in the verify settings..  Works fine.. My problem is mixed turning and milling...

Thanks for replying.   I have the stock model made,   where in the verify settings can I reference this?

[DODGERFAN]

Ahhhhhh,    got it.    I was looking and looking and                 looking, in the wrong place