Update c-hook written for x-6

[chipman]

Hello All,

I have a c-hook that was written by a fellow employee for x-6, unfortunately he passed away earlier this year.

Anyone willing to help me get it updated for x9, and if so what kind of files are needed to re compile?

 

 

Thanks

Rich

[Roger Martin from CNC Software]

Required software tools for building a C-Hook for use with Mastercam X9

1> The Mastercam C-Hook SDK for X9

2> Microsoft Visual Studio 2013 (you can use the Community edition of 2013) <= NOT the new 2015 edition.

You'll need to make some changes to the Project settings for new include paths and .lib files referenced in the C-Hook SDK.

And maybe other changes, depending on what this C-Hook does and if any of the functions it used have changed within Mastercam.

Edited August 14, 2015 by Roger Martin from CNC Software

[Mick from CNC Software Inc.]

There is also an Introduction to C-Hooks document located on mastercam.com under the 3rd Party Developers menu you may find helpful.

[chipman]

Thanks to both of you, I will look into it.