Drill cycle

[Web]

I use mpmaster and noticed that the post processors do not give a cycle when selecting the incremental depth and absolute top of stock and absolute retract

 

In all posts i see the cycle is not called when a new depth 

G00 G17 G90 G54 X0. Y0. S1000 M03

G43 H1 Z.1

G94

G99 G81 Z0. R.1 F5.

X.3937 Z-.1969

X.7874 Z-.3937

X1.1811 Z-.5906

X1.5748 Z-.7874

X1.9685 Z-.9843

G80

 

But need to call the cycle again

G00 G17 G90 G54 X0. Y0. S1000 M03

G43 H1 Z.1

G00 Z.1

G94

G99 G81 Z0. R.1 F5.

G80

X.3937

G00 Z.1

G99 G81 Z-.1969 R.1 F5.

G80

X.7874

G00 Z.1

G99 G81 Z-.3937 R.1 F5.

G80

X1.1811

G00 Z.1

G99 G81 Z-.5906 R.1 F5.

G80

X1.5748

G00 Z.1

G99 G81 Z-.7874 R.1 F5.

G80

X1.9685

G00 Z.1

G99 G81 Z-.9843 R.1 F5.

G80

 

Maybe somebody knows how to fix this and maybe somebody faced with this

I tried to deduce this cycle through the other post processors, but also in other is not called too.