Anybody have problems with verification, if use a segment?

Thank you! I just tried to use the filters in the Dynamic Milling for roughing operations I use total tolerance 50% stock to leave Cut tolerance 20% line/arc tolerance 80% and arcs in G17 XY and on machine aicc - G05.1 Q1 I asked this question because I have very small experience in surface toolpaths

Thank you! I use Fanuc 0md . When need use smoothing?

Yes, I tried to search, but could not find the exact answer, all the recommendations of the different

Please share your experience in the use of filters and tolerance in surface finishing operations To get a perfect surface

I use mpmaster and noticed that the post processors do not give a cycle when selecting the incremental depth and absolute top of stock and absolute retract In all posts i see the cycle is not called when a new depth G00 G17 G90 G54 X0. Y0. S1000 M03 G43 H1 Z.1 G94 G99 G81 Z0. R.1 F5. X.3937 Z-.1969 X.7874 Z-.3937 X1.1811 Z-.5906 X1.5748 Z-.7874 X1.9685 Z-.9843 G80 But need to call the cycle again G00 G17 G90 G54 X0. Y0. S1000 M03 G43 H1 Z.1 G00 Z.1 G94 G99 G81 Z0. R.1 F5. G80 X.3937 G00 Z.1 G99 G81 Z-.1969 R.1 F5. G80 X.7874 G00 Z.1 G99 G81 Z-.3937 R.1 F5. G80 X1.1811 G00 Z.1 G99 G81 Z-.5906 R.1 F5. G80 X1.5748 G00 Z.1 G99 G81 Z-.7874 R.1 F5. G80 X1.9685 G00 Z.1 G99 G81 Z-.9843 R.1 F5. G80 Maybe somebody knows how to fix this and maybe somebody faced with this I tried to deduce this cycle through the other post processors, but also in other is not called too.