Updating scoolant?

[ahaslam]

I got a post working, sent it to my co worker. First thing he says is there is no coolant. So I go look and sure enough no coolant. I check my original copy... coolant works. I file compare the two... he changed a few formatting things but nothing that looks like it would affect the coolant. So I have played around with it, put some watches on my debug and ran it. Got to a break point after my scoolant. Scoolant = 0, prv_scoolant = 0, coolant$ = 1, prv_coolant$ = 0... Why isn't my scoolant updating?

 

Being still pretty new to post edits I would love a quick run down on how updates work. Tried a ! but got nothing. Looked over my fstrsel and it looks fine.

 

# Coolant M code selection

sm09    : "M9"      #Coolant Off (Use sm09_0 through sm09_2)

sm08    : "M8"      #Coolant Flood

sm08_1  : "M7"      #Coolant Mist

sm08_2  : "M8"      #Coolant Tool

sm09_0  : "M9"      #Coolant Flood Off

sm09_1  : "M9"      #Coolant Mist Off

sm09_2  : "M9"      #Coolant Tool Off

scoolant : ""        #Target for string

 

fstrsel sm09 coolant$ scoolant 7 -1