Nesting and values...

[Kristoffersen]

Hi!
I´m building a C# application that creates INI files that we are using  for nesting files.

It looks like this:

 

[PARAMETERS]
VERSION=10.002
TRUESHAPE=FALSE
ACCUNEST=0
AUTOATTACHCHAINS=TRUE
EXACTMODE=0
FITPARTINPART=FALSE
GUILLOTINECUT=FALSE
IGNOREHOLES=FALSE
LABELHEIGHT=2
LABELHEIGHTAUTO=TRUE
OPSELECT_INCLUDE_TOOL_RAD=TRUE
PARTTOPARTDIST=10
PROFILETOLERANCE=0.01
RESOLUTION=1
SEPARATEOPPERSHEET=TRUE
SHEETFILLDIRECTION=X
SHEETTOPARTDIST=0
SORTMAXVACOPS=FALSE
SORTMAXVACCHAINS=FALSE
SORTMINTOOLCHG=TRUE
SORTMODE=2
STARTINGCORNER=1
STOPBETWEENSHEETS=0
FILLALLSHEETS=FALSE
RESCBOX=2
TOOLPATHS=TRUE
WORKOFFSETS=0
WORKOFFSETNUMBERING=2
AUTOORIGINS=TRUE
SHEETTOSHEETDIST=1
ADDLABELS=FALSE
GRAINDIRECTION=N
QUANTITY=1
ONIONSKIN-ACTIVE=FALSE
ONIONSKIN-AREAX=5
ONIONSKIN-AREAY=5
ONIONSKIN-IGNORETABBED=TRUE
ONIONSKIN-METHOD=0
ONIONSKIN-SORT=TRUE
ONIONSKIN-STOCK=0.025
ONIONSKIN-TOOLDIA=0.375
ONIONSKIN-WIDTH=2
ONIONSKIN-TOOLAUTO=TRUE
COMMONEDGE=FALSE
CREATEBLOCKOPS=FALSE
NAMEASLABEL=FALSE
SCRAPNAME=SCRAP.NSLX
ADDPARTSASGROUP=NO
AUTOATTACHSEARCH=NO
AUTOPAIRS=NO
CYCLECOLORS=NO
CYCLELEVELS=NO
CYCLEUNUSED=NO
DELETECHAINS=NO
DISPLAYGROUPPAGE=NO
DISPLAYRESULTSDLG=YES
INNERHOLES=YES
LOADDEFAULTSHEET=YES
NESTFILLERSTONESTHEIGHT=YES
PREFERHOLEFILLING=NO
SAVESCRAP=NO
USEMAINCOLOR=NO
USEMAINLEVEL=NO
OPSELECT_INCLUDE_RAPID_MOVES=0
PARENTOPID=0
RESULTCOLOR=10
RESULTLEVEL=1
RESUSER=1.0
SCANFORNOTES=YES
SORTGROUPBYREGION=NO
SORTGROUPBYSHEET=YES
SORTREGIONORDER=0
SORTREGIONOVERLAP=1.0
SORTREGIONX=0.0
SORTREGIONY=0.0
SORTSTARTPT-X=0.0
SORTSTARTPT-Y=0.0
SORTSTARTPT-Z=0.0
SORTZIGZAG=NO
TOOLORIGINCORNER=1
CREATECHILDOPS=NO
XFMCOPYSOURCEOPS=NO
XFMDISABLEPOSTING=NO
XFMMETHOD=2
XFMSUBPGMABS=NO
XFMSUBPGMON=NO
XFMSUBPGMUNIQUE=NO
XFMWOFF=0
XFMWOFFCREATENEWOPS=NO
XFMWOFFINC=0
XFMWOFFKEEPEXISTINGOP=YES
XFMWOFFMATCHEXISTING=NO
XFMWOFFSTART=0

 

[sHEET]
VERSION=11
SHEETID=1
SHEETNAME=Mystandard
LENGTH=2050
WIDTH=1525
ADDRECTANGULAR=TRUE
ORIGINPOINT-X=0
ORIGINPOINT-Y=0
QUANTITY=0
GRAINDIRECTION=X
DELGEO=FALSE
BASEPOINT-X=0
BASEPOINT-Y=0
MINMAX-X=2500
MINMAX-Y=1500
AMAR=TRUE
CONTOURS-NUMBER=0
NOTES-NUMBER=0
MATERIALNAME=standard
THICKNESS=2

 

[PART0]
VERSION=11
PARTID=377466
PREVID=-1
PARTNAME=C:\mypath\sd1456.mcx-9
PARTLABEL=
LENGTH=1
WIDTH=1
ADDRECTANGULAR=FALSE
USERECTANGULAR=FALSE
MINQUANTITY=1
FILLQUANTITY=0
STEPANGLE=90
PRIORITY=1
COMMONTOOL=FALSE
MIRROR=FALSE
GRAINDIRECTION=N
CLUSTERMETHOD=7
DELGEO=FALSE
BASEPOINT-X=0
BASEPOINT-Y=0
MINMAX-X=1
MINMAX-Y=1
CONTOURS_NUMBER=0
NOTES_NUMBER=0
QUANTITY=1

 

 

The first thing im wondering about is how could i change the step angle in the nesting it seems like it is 90 degrees now. The other thing is if there is some description of all values and what theý are used for. All my ini files are put in a folder then we have a .Net Hook that put all INI files toghether to one file.

Where is there more information about how to work with .Net hooks?

Im also haveing problems with the Label, i woluld like to have a unique label for  each part, even if the same  mcx-9-file is used. I have an idea to use the label for the customer info like
 

 

PARTLABEL= "Customer number:123 Ordernumber:345"

 

 

But this doesen´t seem to work.