need help to find old traditional scallope toolpath

[snguyen6]

 I am new to mastercam and transition from X6 to  Mc 2017 . Can some one help me to find the old  finish 3D scallope and paralell toolpath . Some one show me to Right click on toolpath manager and add it on but I can't find it there , I see there  is 3D pocket and countour but not the scallope , Am I missing some thing ?

second question is  I had set a color for the 3D model but it keep changing every time I select it to do a toolpath , how do I stop it ?

many thanks

[Guest]

Right click in the toolpath manager....

 

[snguyen6]

thank you so much .

  how come I did not see that ?  do you mean right click on the toolpath manager Icon ? I did that and the only thing I see is customzing the Ribbon  and 3 other option which allow you to add a command.

would you show me a screen shot of the icon you right click on ?

 I am not in front of Mastercam now will try it on Monday when back to work.

again thank so much for your help.

[snguyen6]

Never mind , I found it ! thanks