G54/G55 Offets in same session PLEASE HELP DEADLINE

[Kampfzentrum]

I posted a thread on this already and it appears to have gotten tossed with the new layout. I really need help as I am on a deadline for a personal project.

I am running two different fixtures on a single program, I both labelled G54 and G55, however, whenever I generate the program. G55 is going to the absolute position from where it is located away from G54. I am not running a static fixture so I need for G55 to be free to where I set it up. 

So my question is, how do I break G55 away from G54 so that it is it's own offset and not relative to it?

I really need help guys, thanks.

[Guest]

Only on page 2

 

 

[Kampfzentrum]

Ha! You found it! That's odd, the old link I had couldn't find it. Thanks!