POSTING D68 BUT WANT D18 WITH COMP

[Gramby]

We have our first Hurco. I've got a generic Fanuc post I am trying to make work. Hurco is in ISNC mode thus able to read standard code.  # 1 post change I need is for the code to output D18 in the program with the T18 tool when using comp. Currently is outputs D68 with T18. Can anyone tell me what I need to change in my post?  Thank You

[Guest]

Control def...

Set offset to add 0 to tool....

No post edit necessary

[Gramby]

I kind of thought it was in control def also. But I changed it a few ways and it made no difference in my out put code. Still D68 instead of D18. So I then figured it must be done in the post. So I did a search of my post looking for all "50" to see where it might be adding 50 and I couldn't find a thing.  Baffling

[Guess_who]

What does your control definition say?

[Gramby]

Tanks for the input guys. Eventually found the problem.  An extra 50 was stored with the tool in the diameter in the tool library.

 

 

[Gramby]