NetHasp license

[[email protected]]

Attached is an image of my NetHasp Lisence;  It looks like I have Mill Level 1, Router and "curve5ax";  I'm not sure how I would use curve5ax without Solids.  Can someone help me make sense out of this license?  Could I be having a NetHasp issue.

What are the different licensing options and what do they do?

Thanks, in advance, for any help.

 

Edited September 7, 2017 by JParis
Removed cap showing sim #

[Guest]

Dude, at least fuzz out your serial number, you don't want that out for public info

Repost it if you like after doing so...

curve5ax is curve driven.....you can still import solids and create the necessary driving curves to make functional toolpaths

I am guessing you're previous to X9....solids was included starting with X9

Edited September 7, 2017 by Guest

[[email protected]]

Sorry bout the serial number;  My X7 version includes a solids manager, however, I can't do anything with it because it says I'm not licensed.  I can import curve5ax files and they show up in the solids manager; it is so confusing to me.  

[Guest]

You are correct, you cannot move or modify a solid....

However, that does not mean they are unusable.  You can still move the WCS to where you need it on the solid, you can still create the needed edge curves off of the solid to drive the path, you can also create surfaces from the solid.....all of these used in conjunction and you can drive the 5axcurve toolpath....

If you have no idea where to start, a call to your reseller is in order.....

Edited September 9, 2017 by Guest