Concatenate post processors?

[daniel.deleon.mtz]

Hello! I'm new at mastercam postprocessor programing... we had Esprit software and recently we adquired mastercam. I'm modificating a postprocessor we found for our old charmilles robofil 6020. I would like to know if there is a way to concatenate post processor to generate several different codes... In esprit, we ceated a PPL file (a file that lists 3 postprocessor) which use 3 postprocessors for different formats: the first one generate a main CMD file that calls the subprograms the second postprocessor generate several CMD files each one is in charge of running the subroutines for each operation. the last one generate the ISO files which contains GCode for each geometry... I would like to keep the same workflow since code would be more clear to read.

Atached you will found an example of what I want... a main program which calls subprograms and each subprogram call a ISO file for the geometry. I also add the mastercam post processor I am working on...

Regards

CD4B(CMD).TXT

CD4B1(CMD).TXT

CD4B1(ISO).TXT

MPWR1020.TXT

[Guest]

Have you checked with your Mastercam reseller to see if there is already a post available for this?

[daniel.deleon.mtz]

Thank you for your answer, Our reseller give us the attached post I just made a few adustments

Regards