Okuma error 5223

[canyondrift]

Helloo,

I'm new to this forum, but i have got alot of good info from here so thank you all!

Now i'm facing a problem that our Okuma M560 with OSP-P300 and it's .LIB file...

I wanted to add G116 logic to our machine that controls the toolchange that we dont have to manually enter M64 each time wrong tool is prepared and we want to start a program.

We are getting the 5223 error that says buffer overflow... We are using .lib file that allready has tool measurement macros in it and if i increase the size of the file by adding just a coupe of lines, then we get this error...

So my question is. Is there a way to increase buffer size (at the moment its only 5Kb?) or can i rewrite the .lib file that it is selecting automatically a smaller program that contains CALL or GOTO-s to another program in MD1 directory?

Thanks for your help!

[canyondrift]

I  guess i was ahead of myself...

Got the G116 working - just needed to select the .LIB file, change the buffer size bigger and now it works like a charm.

At first i understood that i can just make some changes to my LIB file, save it, restart the machine and we are good to go... Not so simple. Or maybe even simpler.

I had to reload the LIB file - at first i didn't find the place to do it. and write the lib program name to parameters. Now we're good to go. Here is the G116 that i used.