How to import operations with Net-HOOK?

[Tariq Aslam]

is there a  class for modifying and creating turning toolpath operations in Mastercam. Or any form of lathe operations

[byte]

15 minutes ago, Tariq Aslam said:

is there a  class for modifying and creating turning toolpath operations in Mastercam. Or any form of lathe operations

can you repost these on the main Mastercam forum please?

[Tariq Aslam]

I have reposted in the Main mastercam forum,  by creating a new topic titled " Creating lathe or turning operations in Mastercam using NETHOOK"

[byte]

3 hours ago, Tariq Aslam said:

I have reposted in the Main mastercam forum,  by creating a new topic titled " Creating lathe or turning operations in Mastercam using NETHOOK"

Thank you, see you over there

[Tariq Aslam]

See you there. Thanks in advance for the help

 

[Tariq Aslam]

Please help me in this regard 

[byte]

13 hours ago, Tariq Aslam said:

Please help me in this regard 

What's your handle on the main forum??

 

I don't see your question..

[Tariq Aslam]

The question is posted in the "Post Processor Development Forum" in the section "Mastercam C-Hook, NET-Hook and VBScriptDevelopment". The question is termed "Creating lathe or turning operations in Mastercam using NETHOOK".

[byte]

1 hour ago, Tariq Aslam said:

The question is posted in the "Post Processor Development Forum" in the section "Mastercam C-Hook, NET-Hook and VBScriptDevelopment". The question is termed "Creating lathe or turning operations in Mastercam using NETHOOK".

Ah okay that's the wrong section, it should be in the 3rd party development section 

[byte]

5 hours ago, Tariq Aslam said:

The question is posted in the "Post Processor Development Forum" in the section "Mastercam C-Hook, NET-Hook and VBScriptDevelopment". The question is termed "Creating lathe or turning operations in Mastercam using NETHOOK".

You need to repost on Mastercam.com forum

[Tariq Aslam]

Hey, I have now posted in mastercam forums under 3rd party development section as you mentioned. The topic is "CREATING TOOLPATHS BY DEFINING LATHE OR TURNING OPERATIONS IN MASTERCAM USING NETHOOK".

 

Best Regards

Tariq

[byte]

32 minutes ago, Tariq Aslam said:

Hey, I have now posted in mastercam forums under 3rd party development section as you mentioned. The topic is "CREATING TOOLPATHS BY DEFINING LATHE OR TURNING OPERATIONS IN MASTERCAM USING NETHOOK".

 

Best Regards

Tariq

Thanks!

[Tariq Aslam]

Looking forward to your help !!Thanks in advance

[byte]

23 minutes ago, Tariq Aslam said:

Looking forward to your help !!Thanks in advance

You are welcome, it's always best to post on mastercams official forum because not everyone from there visits here, 

[Tariq Aslam]

Yeah sure, I will keep that in mind. 

[Tariq Aslam]

I really need help in this, as we are working on a thesis project related to turning toolpath integration in multiple CAM systems